configurer GraphWeather et Cumulus

Une question, un bug ?
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

je ne vois rien sur tes captures, mais c'est ton chemin d'accès qui est faux

The requested URL /meteographweather/Statistics/MyGWStats.php was not found on this server.

A+
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

en fait tu n'as pas uploader le fichier MyGWStats.php sur ton serveur :roll:
gw-stats.jpg
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
cooltardif37
Membre
Messages : 67
Inscription : dim. févr. 15, 2015 7:01 pm
Contact :

Re: configurer GraphWeather et Cumulus

Message par cooltardif37 »

je suis désolé mais je n'y arrive pas. Mais mes connaissances à ce niveau sont trés limitées...peus tu être précis quant au positionnement des fichiers
Merci et désolé de te solliciter
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

tu dois exporter le répertoire statistics avec GW, c'est expliqué ici en bas de page, section "Les statistiques :"

http://www.boock.ch/meteo/tuto_nouveau_ ... ite_03.php

A+
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
cooltardif37
Membre
Messages : 67
Inscription : dim. févr. 15, 2015 7:01 pm
Contact :

Re: configurer GraphWeather et Cumulus

Message par cooltardif37 »

Ok, je l'avais fait, mais c'est le fichier MyGW et graphs.php je les place dans quel dossier de mon site?
cordialement
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

le fichier graph.php ??? je ne vois pas de quoi tu parles.
Le fichier MyGWStats.php est dans le répertoire Statistics, il sera sur ton serveur une fois que tu auras configuré l'exportation du dossier comme je te l'ai dit plus haut.

A+
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

tu as installé un script autre que celui d'origine qui est dans gw et je ne peux pas t'aider sur une script inconnu
http://www.cooltardif37.com/meteographw ... readme.txt

ou chose bizarre il semble que tu as une version préhistorique de GW :roll:

http://www.cooltardif37.com/meteographw ... s/MyGW.php

généré dynamiquement avec la version 1.5.1 de GraphWeather

Il te faut au minimum la version 2, mais je te conseil la version 3.0.15
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
cooltardif37
Membre
Messages : 67
Inscription : dim. févr. 15, 2015 7:01 pm
Contact :

Re: configurer GraphWeather et Cumulus

Message par cooltardif37 »

ben non, j'ai bien installé la version GraphWeather_3.0.15_fr
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

alors il viennent d'ou ces fichiers ? ils n'existent pas dans la version 3 ni dans mon template ?
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
cooltardif37
Membre
Messages : 67
Inscription : dim. févr. 15, 2015 7:01 pm
Contact :

Re: configurer GraphWeather et Cumulus

Message par cooltardif37 »

j'ai du confondre, car ces fichiers sont dans le dossier sample, à la lecture du fichier texte, j'etais parti sur une installation...
cooltardif37
Membre
Messages : 67
Inscription : dim. févr. 15, 2015 7:01 pm
Contact :

Re: configurer GraphWeather et Cumulus

Message par cooltardif37 »

bonsoir,
j'ai donc vérifié mes fichiers mais mes prévisions GW ne s'affichent toujours pas sur mon site qui me donne un message d'erreurci-joint une photos de l'installation et de l'arborescence FilleZilla
merci
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
cooltardif37
Membre
Messages : 67
Inscription : dim. févr. 15, 2015 7:01 pm
Contact :

Re: configurer GraphWeather et Cumulus

Message par cooltardif37 »

voici l'autre copie de fichier
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

Non, c'est bon
http://cooltardi1.freeheberg.org/meteog ... tiques.php

tous les fichiers sont sur ton serveur
http://cooltardi1.freeheberg.org/meteog ... tatistics/

http://cooltardi1.freeheberg.org/meteog ... WStats.php

Heu, tu fait comment tes captures d'écran, avec un appareil photo :lol: il y a des bons logiciel gratuit pour faire ça ou simplement la touche "print screen" de ton clavier
1111.jpg
A+
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
Dernière modification par paaubert le sam. déc. 05, 2015 12:04 am, modifié 2 fois.
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
cooltardif37
Membre
Messages : 67
Inscription : dim. févr. 15, 2015 7:01 pm
Contact :

Re: configurer GraphWeather et Cumulus

Message par cooltardif37 »

alors pourquoi rien ne s'affiche?
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: configurer GraphWeather et Cumulus

Message par paaubert »

Actualises ta page ou vide le cache de ton navigateur, chez moi c'est OK
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
Répondre