configurer GraphWeather et Cumulus
- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
je ne vois rien sur tes captures, mais c'est ton chemin d'accès qui est faux
The requested URL /meteographweather/Statistics/MyGWStats.php was not found on this server.
A+
The requested URL /meteographweather/Statistics/MyGWStats.php was not found on this server.
A+
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
en fait tu n'as pas uploader le fichier MyGWStats.php sur ton serveur

Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

-
- Membre
- Messages : 67
- Inscription : dim. févr. 15, 2015 7:01 pm
- Contact :
Re: configurer GraphWeather et Cumulus
je suis désolé mais je n'y arrive pas. Mais mes connaissances à ce niveau sont trés limitées...peus tu être précis quant au positionnement des fichiers
Merci et désolé de te solliciter
Merci et désolé de te solliciter
- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
tu dois exporter le répertoire statistics avec GW, c'est expliqué ici en bas de page, section "Les statistiques :"
http://www.boock.ch/meteo/tuto_nouveau_ ... ite_03.php
A+
http://www.boock.ch/meteo/tuto_nouveau_ ... ite_03.php
A+
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

-
- Membre
- Messages : 67
- Inscription : dim. févr. 15, 2015 7:01 pm
- Contact :
Re: configurer GraphWeather et Cumulus
Ok, je l'avais fait, mais c'est le fichier MyGW et graphs.php je les place dans quel dossier de mon site?
cordialement
cordialement
- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
le fichier graph.php ??? je ne vois pas de quoi tu parles.
Le fichier MyGWStats.php est dans le répertoire Statistics, il sera sur ton serveur une fois que tu auras configuré l'exportation du dossier comme je te l'ai dit plus haut.
A+
Le fichier MyGWStats.php est dans le répertoire Statistics, il sera sur ton serveur une fois que tu auras configuré l'exportation du dossier comme je te l'ai dit plus haut.
A+
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
tu as installé un script autre que celui d'origine qui est dans gw et je ne peux pas t'aider sur une script inconnu
http://www.cooltardif37.com/meteographw ... readme.txt
ou chose bizarre il semble que tu as une version préhistorique de GW
http://www.cooltardif37.com/meteographw ... s/MyGW.php
généré dynamiquement avec la version 1.5.1 de GraphWeather
Il te faut au minimum la version 2, mais je te conseil la version 3.0.15
http://www.cooltardif37.com/meteographw ... readme.txt
ou chose bizarre il semble que tu as une version préhistorique de GW

http://www.cooltardif37.com/meteographw ... s/MyGW.php
généré dynamiquement avec la version 1.5.1 de GraphWeather
Il te faut au minimum la version 2, mais je te conseil la version 3.0.15
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

-
- Membre
- Messages : 67
- Inscription : dim. févr. 15, 2015 7:01 pm
- Contact :
Re: configurer GraphWeather et Cumulus
ben non, j'ai bien installé la version GraphWeather_3.0.15_fr
- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
alors il viennent d'ou ces fichiers ? ils n'existent pas dans la version 3 ni dans mon template ?
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

-
- Membre
- Messages : 67
- Inscription : dim. févr. 15, 2015 7:01 pm
- Contact :
Re: configurer GraphWeather et Cumulus
j'ai du confondre, car ces fichiers sont dans le dossier sample, à la lecture du fichier texte, j'etais parti sur une installation...
-
- Membre
- Messages : 67
- Inscription : dim. févr. 15, 2015 7:01 pm
- Contact :
Re: configurer GraphWeather et Cumulus
bonsoir,
j'ai donc vérifié mes fichiers mais mes prévisions GW ne s'affichent toujours pas sur mon site qui me donne un message d'erreurci-joint une photos de l'installation et de l'arborescence FilleZilla
merci
j'ai donc vérifié mes fichiers mais mes prévisions GW ne s'affichent toujours pas sur mon site qui me donne un message d'erreurci-joint une photos de l'installation et de l'arborescence FilleZilla
merci
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
-
- Membre
- Messages : 67
- Inscription : dim. févr. 15, 2015 7:01 pm
- Contact :
Re: configurer GraphWeather et Cumulus
voici l'autre copie de fichier
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
Non, c'est bon
http://cooltardi1.freeheberg.org/meteog ... tiques.php
tous les fichiers sont sur ton serveur
http://cooltardi1.freeheberg.org/meteog ... tatistics/
http://cooltardi1.freeheberg.org/meteog ... WStats.php
Heu, tu fait comment tes captures d'écran, avec un appareil photo
il y a des bons logiciel gratuit pour faire ça ou simplement la touche "print screen" de ton clavier
A+
http://cooltardi1.freeheberg.org/meteog ... tiques.php
tous les fichiers sont sur ton serveur
http://cooltardi1.freeheberg.org/meteog ... tatistics/
http://cooltardi1.freeheberg.org/meteog ... WStats.php
Heu, tu fait comment tes captures d'écran, avec un appareil photo

A+
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
Dernière modification par paaubert le sam. déc. 05, 2015 12:04 am, modifié 2 fois.
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

-
- Membre
- Messages : 67
- Inscription : dim. févr. 15, 2015 7:01 pm
- Contact :
Re: configurer GraphWeather et Cumulus
alors pourquoi rien ne s'affiche?
- paaubert
- Membre
- Messages : 2624
- Inscription : dim. janv. 17, 2010 7:16 pm
- Localisation : 1555 Villarzel - Switzerland
- Contact :
Re: configurer GraphWeather et Cumulus
Actualises ta page ou vide le cache de ton navigateur, chez moi c'est OK
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php

Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
