Affichage Gauges

Dernière version disponible
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: Affichage Gauges

Message par paaubert »

Pourquoi ce phénomène ?????
Alors tant mieux que ça fonctionne, je commençait à désespérer, par contre c'est un mystère ce truc :roll:

A+
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
jpmath
Membre
Messages : 52
Inscription : mer. avr. 01, 2009 6:54 pm
Localisation : PLAZAC 24 Dordogne - Perigord
Contact :

Re: Affichage Gauges

Message par jpmath »

Je confirme après ajout d'un graphique à Exporter il se rajoute à la fin dans le fichier config.cfg et ne s'exporte pas.

[FTP_EXPORT_21]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Icon.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\Icon.xml
Template=
LocalDirectory=
RemoteDirectory=

Par contre la ligne Template= est vide alors quel devrait être: Template= D:\METEO\GraphWeather\Templates\

Même si je complète manuellement cette ligne, pas d'export, sans doute du que l'ordre est placé à la fin après les ordres d'export des " Répertoires à exporte ".
Station BRESSER équivalent à Vion 4 928DV - Logiciels : WsWin + GW 2.0.321 sous Windows XP
Avatar de l’utilisateur
jturlier
Membre
Messages : 3149
Inscription : mar. août 22, 2006 8:38 am
Localisation : 34410 Sérignan - Languedoc
Contact :

Re: Affichage Gauges

Message par jturlier »

Bonjour,
pourrais-tu remettre ton fichier config.cfg en utlisant "quote" pour l'insérer.
D'une façon générale, il est fortement déconseillé de le modifier toi-même. Il est impératif que ce fichier ne soit manipulé que par GW lui-même.
En regardant celui que tu as mis en ligne sur la page précédente, j'ai repéré des anomalies : des exports vides(erreur dans les données fournies pour paramétrer les exports).
Il semble qu'il y ait aussi des "type" incompatibles avec ce que tu veux exporter (manipulation hors GW).
On en revient aussi toujours au même point, il est recommandé d'utiliser la version 3 !!! Ce n'est pas parce que tu ne réussis pas à la faire fonctionner qu'elle pose des problèmes. Je pense que tu ferais mieux de t'acharner sur son installation plutôt que sur un problème à la version 2 que tu as probablement créé toi-même.
Pour résumer :
Il est souhaitable que tu refasses ta toute configuration en repartant de zéro. Toutes les manipulations actuelles ne font qu'ajouter des erreurs aux erreurs !

Jean
jpmath
Membre
Messages : 52
Inscription : mer. avr. 01, 2009 6:54 pm
Localisation : PLAZAC 24 Dordogne - Perigord
Contact :

Re: Affichage Gauges

Message par jpmath »

jturlier a écrit :Bonjour,
pourrais-tu remettre ton fichier config.cfg en utlisant "quote" pour l'insérer.
D'une façon générale, il est fortement déconseillé de le modifier toi-même. Il est impératif que ce fichier ne soit manipulé que par GW lui-même.
En regardant celui que tu as mis en ligne sur la page précédente, j'ai repéré des anomalies : des exports vides(erreur dans les données fournies pour paramétrer les exports).
Il semble qu'il y ait aussi des "type" incompatibles avec ce que tu veux exporter (manipulation hors GW).
On en revient aussi toujours au même point, il est recommandé d'utiliser la version 3 !!! Ce n'est pas parce que tu ne réussis pas à la faire fonctionner qu'elle pose des problèmes. Je pense que tu ferais mieux de t'acharner sur son installation plutôt que sur un problème à la version 2 que tu as probablement créé toi-même.
Pour résumer :
Il est souhaitable que tu refasses ta toute configuration en repartant de zéro. Toutes les manipulations actuelles ne font qu'ajouter des erreurs aux erreurs !

Jean
[VERSION]
Version=2.0.321
Licence=2iCFcMYJjDhTcFFA4klfSZYe2oROneNr7oEJ
[GENERAL]
MultipleInstances=1
Minimize=0
AutoUpdateTime=30
MsnDisplay=0
NewGUI=1
Confirm=1
Stylesheet=D:\METEO\GraphWeather\Stylesheets\mini2temp.xml
StylesheetEditor=C:\Program Files\Notepad++\notepad++.exe
Units=65536
UseConventionForWC=1
UseConventionForHI=1
DateLanguage=French
[PLUGIN_BASE]
Plugin=WSWIN.dll
Source00=D:\METEO\Wswin\*.*
[PLUGIN_OPTIONAL1]
Plugin=
[PLUGIN_OPTIONAL2]
Plugin=
[LOCATION]
Longitude=1.036111
Latitude=45.023613
Altitude=220.000000
Timezone=1
Country=PLAZAC
Station=BRESSER
[DIRECTX]
DeviceType=1
MultiSampleType=0
MaxPoints=500
DXWidth=900
DXHeight=800
Interpolation=16416
[STATISTICS]
StatsAutoUpdate=1
StatsUpdateInterval=1
StatsGenerateXML=1
StatsGenerateNOAA=1
SolarRadiationThreshold=100
SunshineDayThreshold=75
[FTP]
Login=Site@plazacmeteo.fr
Password=mGfCMcQC1nkVIlpG
Server=plazacmeteo.fr
ForceRestartOnError=1
DynamicConnection=1
ActiveMode=0
Port=21
ExportsAtStartup=1
RealTimeAtStartup=0
[FTP_EXPORT_1]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=TempAbri.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\TempExt 2.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_2]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=TempSoleil.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\Tgirouette.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_3]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Pointderose.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\Point de rose.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_4]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Tauvent.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\Tau vent.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_5]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Vent.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\2014Vent.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_6]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Baro.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\Baro2014B.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_7]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=2014H.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\2014Humidite.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_8]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Pluie.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\2014Pluie.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_9]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=report4.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\report4.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_10]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=mobile.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\Banniere 4.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_11]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Tjour.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\mini2temp.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_12]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=graph_monthx.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\graph_monthx.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_13]
Type=4
PluginType=0
Format=0
UpdateInterval=10
Range=0
RemoteFile=
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=D:\METEO\GraphWeather\Statistics
RemoteDirectory=
[FTP_EXPORT_14]
Type=4
PluginType=0
Format=0
UpdateInterval=10
Range=0
RemoteFile=
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=D:\METEO\GraphWeather\Stylesheets
RemoteDirectory=
[FTP_EXPORT_15]
Type=4
PluginType=0
Format=0
UpdateInterval=10
Range=0
RemoteFile=
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=D:\METEO\Wswin\Text
RemoteDirectory=
[FTP_EXPORT_16]
Type=4
PluginType=0
Format=0
UpdateInterval=10
Range=0
RemoteFile=
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=D:\METEO\Wswin\html
RemoteDirectory=
[FTP_EXPORT_17]
Type=4
PluginType=0
Format=0
UpdateInterval=10
Range=0
RemoteFile=
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=D:\METEO\Wswin\NoAAClim
RemoteDirectory=
[FTP_EXPORT_18]
Type=2
PluginType=0
Format=17
UpdateInterval=5
Range=805306368
RemoteFile=/Gauges-SteelSeries/realtimegauges.txt
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\realtimegauges.txt
LocalDirectory=
RemoteDirectory=
[FTP_EXPORT_19]
Type=4
PluginType=0
Format=0
UpdateInterval=10
Range=0
RemoteFile=
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=D:\METEO\Site
RemoteDirectory=
[FTP_EXPORT_20]
Type=4
PluginType=0
Format=0
UpdateInterval=10
Range=0
RemoteFile=
Stylesheet=D:\METEO\GraphWeather\Stylesheets\
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=D:\METEO\Site
RemoteDirectory=
[FTP_EXPORT_21]
Type=0
PluginType=0
Format=1
UpdateInterval=5
Range=805306368
RemoteFile=Icon.png
Stylesheet=D:\METEO\GraphWeather\Stylesheets\Icon.xml
Template=D:\METEO\GraphWeather\Templates\
LocalDirectory=
RemoteDirectory=
[FTP_REALTIME_EXPORT]
Type=3
PluginType=0
Format=0
UpdateInterval=120
Range=60
RemoteFile=
Template=D:\METEO\GraphWeather\Templates\
[HTTP]
AtStartup=0
Port=80
[AWEKAS]
Username=
Password=
Enabled=0
Language=en
[WUNDERGROUND]
Username=
Password=
Enabled=0
[PREVIMETEO]
Username=
Password=
Enabled=0
[ASMER]
FTP=
Active=0
Username=
Password=
Directory=
Enabled=0
[FORECAST]
sunny_comment=Ensoleillé
partly_cloudy_comment=Partiellement nuageux
cloudy_comment=Nuageux
heavy_cloudy_comment=Très nuageux
light_rain_comment=Pluie
heavy_rain_comment=Forte pluie
fog_comment=Brouillard
thunderstrom_comment=Orages
snow_comment=Neige
sleet_comment=Neige fondante
clear_night_comment=Nuit dégagée
partly_cloudy_night_comment=Partiellement nuageux
cloudy_night_comment=Nuageux
unknown_comment=Inconnu
SunnyLowPressure=1026.000000
HeavyCloudyHighPressure=1013.000000
HeavyCloudyLowPressure=1000.000000
HeavyRainHighPressure=973.000000
[WEATHER_CONDITIONS]
ValidityTime=10800
[CALIBRATION_BASE_0]
Used=0
Slope=1.000000
Intercept=0.000000
Low=950.000000
Hi=1050.000000
[CALIBRATION_BASE_1]
Used=0
Slope=1.000000
Intercept=0.000000
Low=950.000000
Hi=1050.000000
[CALIBRATION_BASE_2]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100000.000000
[CALIBRATION_BASE_3]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_4]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_5]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_6]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_7]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_8]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_9]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=183.000000
[CALIBRATION_BASE_10]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=360.000000
[CALIBRATION_BASE_11]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=183.000000
[CALIBRATION_BASE_12]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_13]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=1000.000000
[CALIBRATION_BASE_14]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=14.000000
[CALIBRATION_BASE_15]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_16]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=15000.000000
[CALIBRATION_BASE_17]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_18]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=500.000000
[CALIBRATION_BASE_19]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_20]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_21]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_22]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_23]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_24]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_25]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_BASE_26]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_27]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_28]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_29]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_30]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_31]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_BASE_32]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_0]
Used=0
Slope=1.000000
Intercept=0.000000
Low=950.000000
Hi=1050.000000
[CALIBRATION_OPTIONAL_1_1]
Used=0
Slope=1.000000
Intercept=0.000000
Low=950.000000
Hi=1050.000000
[CALIBRATION_OPTIONAL_1_2]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100000.000000
[CALIBRATION_OPTIONAL_1_3]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_4]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_5]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_6]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_7]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_8]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_9]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=183.000000
[CALIBRATION_OPTIONAL_1_10]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=360.000000
[CALIBRATION_OPTIONAL_1_11]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=183.000000
[CALIBRATION_OPTIONAL_1_12]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_13]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=1000.000000
[CALIBRATION_OPTIONAL_1_14]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=14.000000
[CALIBRATION_OPTIONAL_1_15]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_16]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=15000.000000
[CALIBRATION_OPTIONAL_1_17]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_18]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=500.000000
[CALIBRATION_OPTIONAL_1_19]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_20]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_21]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_22]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_23]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_24]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_25]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_1_26]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_27]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_28]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_29]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_30]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_31]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_1_32]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_0]
Used=0
Slope=1.000000
Intercept=0.000000
Low=950.000000
Hi=1050.000000
[CALIBRATION_OPTIONAL_2_1]
Used=0
Slope=1.000000
Intercept=0.000000
Low=950.000000
Hi=1050.000000
[CALIBRATION_OPTIONAL_2_2]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100000.000000
[CALIBRATION_OPTIONAL_2_3]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_4]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_5]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_6]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_7]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_8]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_9]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=183.000000
[CALIBRATION_OPTIONAL_2_10]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=360.000000
[CALIBRATION_OPTIONAL_2_11]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=183.000000
[CALIBRATION_OPTIONAL_2_12]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_13]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=1000.000000
[CALIBRATION_OPTIONAL_2_14]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=14.000000
[CALIBRATION_OPTIONAL_2_15]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_16]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=15000.000000
[CALIBRATION_OPTIONAL_2_17]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_18]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=500.000000
[CALIBRATION_OPTIONAL_2_19]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_20]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_21]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_22]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_23]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_24]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_25]
Used=0
Slope=1.000000
Intercept=0.000000
Low=-60.000000
Hi=60.000000
[CALIBRATION_OPTIONAL_2_26]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_27]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_28]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_29]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_30]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_31]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[CALIBRATION_OPTIONAL_2_32]
Used=0
Slope=1.000000
Intercept=0.000000
Low=0.000000
Hi=100.000000
[POSITION]
Top=51
Left=29
Bottom=661
Right=1004
[TAB_0]
Title=Graphique 1
Active=1
Stylesheet=D:\METEO\GraphWeather\Stylesheets\mini2temp.xml
PaneOptionsVisible=1
AutoUpdateState=1
UpdateType=1
Voici mon fichier Config.cfg . Depuis mon dernier post j'ai redémarré GW et le graph "Icon" s'exporte ....
Je pense que mon gros souci provient de ma config , Un vieux portable avec peut de mémoire Ram ( 768 Mo ) qui fait tourner WsWin et GW en permanence.C'est mon premier objectif à résoudre, et je passerai à GW3, j'ouvrirai au préalable un post car la version WsWin+GW il y a des petits pb de reconnaissance de sondes.

Dans l’immédiat je fait des sauvegardes régulière avec "Cobian". Merci à tous pour votre aide précieuse et tout ce que vous apportez au Néophyte comme moi et au plus expérimentés.
Station BRESSER équivalent à Vion 4 928DV - Logiciels : WsWin + GW 2.0.321 sous Windows XP
Avatar de l’utilisateur
jturlier
Membre
Messages : 3149
Inscription : mar. août 22, 2006 8:38 am
Localisation : 34410 Sérignan - Languedoc
Contact :

Re: Affichage Gauges

Message par jturlier »

Re-bonjour,
les exports 14-15-16-17-19 n'exportent rien. Ils devraient correspondre à des exports de répertoires.
jpmath a écrit : Je pense que mon gros souci provient de ma config
Pas celle de ton PC, mais celle de GW.
Ton "petit" PC avec 768Mo devrait être tout à fait suffisant avec GW3 (qui est beaucoup moins gourmand en ressources et beaucoup plus rapide que la V2) et WsWin.
jpmath a écrit : j'ouvrirai au préalable un post car la version WsWin+GW il y a des petits pb de reconnaissance de sondes
Je n'ai pas vu ce problème avec la version 3.
Bonne continuation

Jean
jpmath
Membre
Messages : 52
Inscription : mer. avr. 01, 2009 6:54 pm
Localisation : PLAZAC 24 Dordogne - Perigord
Contact :

Re: Affichage Gauges

Message par jpmath »

jturlier a écrit :Re-bonjour,
les exports 14-15-16-17-19 n'exportent rien. Ils devraient correspondre à des exports de répertoires.
jpmath a écrit : Je pense que mon gros souci provient de ma config
Pas celle de ton PC, mais celle de GW.
Ton "petit" PC avec 768Mo devrait être tout à fait suffisant avec GW3 (qui est beaucoup moins gourmand en ressources et beaucoup plus rapide que la V2) et WsWin.
jpmath a écrit : j'ouvrirai au préalable un post car la version WsWin+GW il y a des petits pb de reconnaissance de sondes
Je n'ai pas vu ce problème avec la version 3.
Bonne continuation

Jean
Merci pour ces encouragements je vais essayer de faire le saut dans un premier temps est il possible de faire cohabiter les deux versions ?
Station BRESSER équivalent à Vion 4 928DV - Logiciels : WsWin + GW 2.0.321 sous Windows XP
Avatar de l’utilisateur
ardigier
Membre
Messages : 2260
Inscription : mar. mars 23, 2010 6:05 pm
Localisation : Le Thor 84250
Contact :

Re: Affichage Gauges

Message par ardigier »

oui il suffit d'installer la V3 dans un répertoire différent
WMR200 - XNet meteo 2011-10-14a- graphweather V 3.0.35- Win10 x64
webcam installée orientation NE
http://le-thor-meteo.com/index.php
Répondre