Time confused.....

[monte bianco]

Hi folk...

My first post...my first question

I have problem with time...

I use v2.0.281b with WS3600.dll for my Lacrosse3650

I set my time zone to +1 in Location and in "Option/Data sources" option of ws3600.dll i put-in -2 in "Adjust hour"

In TAB "last 24h" i have exactly time (current time) on the right margin of graphics, the meteo value is syncro with current time and this is OK.

The issue is in the $WeatherConditions[Icon].
If i read rise and set time of ephemerides, i have exactly 2 hours of delay with SunRise, SunSet and MoonRise, moonSet in Weather conditions Icon.

I tray to set in option of ws3600.dll, +0 in "Adjust hour".
The $WeatherConditions[Icon] working fine... but in TAB "last 24h" the meteo value on the right margin is not a current value but a old value, delayed 2 hours before...

Is possible to have a good time and a correct Icon in weather Condition??

Tank you in advance

[TiToine]

Your station is correctly configured with the your timezone? and Windows too?

[monte bianco]

Your station is correctly configured with the your timezone? and Windows too?

Hi TiToine.

Yes, my timezone (Rome) is +1 and Windows Time is correctly...

Ciao.

[Pidou]

Check you have correctly set longitude, it has to be negative in East direction

[monte bianco]

Check you have correctly set longitude, it has to be negative in East direction

Hi Pidou

Yes, my Longitude is negative, i have in ephemerid rise and set time OK for my location.

With -2h in "Adjust hours" in "Option/Data sources" the time in graphics is OK but the $WeatherConditions[Icon] is wrong, change fron sun to moon with 2 delayed hours.
If i set +0h in "Adjust hours" $WeatherConditions[Icon] working fine but the time in graphics is wrong....i use Stylesheets gradient.xml and if i use Last 24h, i have a 2 ours of delay on the right margin for temperature value but also for all Pressure and Humidity, all value old 2 hours before....

Ciao.

[Pidou]

OK, I missunderstood your problem.
I have no issue of this kind in the french version

[TiToine]

Do you know if the history.dat format is the same for WS3600 and WS3650?
Note that the Weather Condition icon can be different on your WS3650 display.

[monte bianco]

Do you know if the history.dat format is the same for WS3600 and WS3650?
Note that the Weather Condition icon can be different on your WS3650 display.

Hi TiToine.

No, i don't know if history.dat is the same for 3650 and 3600...

But the problem is not on my display..but in Temps actuel icon
$WeatherConditions[Icon]
I have a sun set with 2 hours of delay in comparison to the right time of ephemerid, sun set at 22:46 instead of 20:46.
Yes i have a -2h in "Adjust hours" in "Option/Data sources" but with this setting the current time is OK and syncro with current meteo value (temp, pressure) on the extreme right margin gradient.xml (current day graphics)

If i set +0h in "Adjust hours" in "Option/Data sources", i have
$WeatherConditions[Icon] OK, sun set is at 20:46 but the temperature, pressure on on the extreme right margin gradient.xml (current day graphics) is wrong, the value ar old value, delayed 2 hours before.

Sorry for my bad english...

Ciao.

[TiToine]

Send me your history.dat with the last record date. I will take a look.