si quelqu'un a la solution!! graphweather

Dernière version disponible
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

et pour finir voici le problème de l'Historique de ma station qui évolue pas :?:
peu t être que sa viens de la
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par paaubert »

pourquoi tu as 212.15.10.1 comme adresse du serveur dans HW et ftpperso.212.15.10.1 dans GW?
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

c est le numéro qui mon dit pour me connecter au serveur hosteur c'est numero et non pas exemple free.fr que j avais y a longntemp
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par paaubert »

oui pas de problème, c'est l'adresse IP du serveur, mais pourquoi dans GW tu a rajouté ftpperso. avant l'adresse IP ?
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

pourquoi il faut pas ?
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par paaubert »

je sais pas essaye, tu ne l'a pas mis dans HW et ça fonctionne !!!
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

j essaye de mieux comprendre la phrase j essaye quoi ?
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
Avatar de l’utilisateur
paaubert
Membre
Messages : 2624
Inscription : dim. janv. 17, 2010 7:16 pm
Localisation : 1555 Villarzel - Switzerland
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par paaubert »

bin de mettre uniquement l'adresse IP
_________________________________________________________________________________________________________
Station Vantage Pro2+ avec station agricole - Weatherlink 6.0.3 - GraphWeather 3.0.15b - Cumulus 1.9.4 - Windows W10 ultimate x64
http://www.boock.ch/meteo-villarzel.php
Image
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

a ok lol c est fait mes sa change rien
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

si sa fonctionne je posterais un message mes c est mal barré je crois que je vais me contenté seulement de HWP sauf si quelqu'un a la solution :roll: je reviens de temps en temps pour voir se qui est proposé bonne météo a tous et merci d'avoir essayer . :(
ps:merci a toi paaubert je resterais a ta disposition si ta d autres idées
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

j ai remarque que mon fichier history.dat c est un bloc note normalement c'est un csv pour sa que sa marche pas ?
comment recuperer se fichier CSV History.dat .
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
Avatar de l’utilisateur
iceman62
Membre
Messages : 176
Inscription : mar. avr. 12, 2011 10:14 am
Localisation : Achiet-le-grand
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par iceman62 »

Salut Pierre André, Salut Jean et salut stationmcw

Bon j'ai lu tes mails stationmcw et le post.
j ai remarque que mon fichier history.dat c est un bloc note normalement c'est un csv pour sa que sa marche pas ?
comment recuperer se fichier CSV History.dat .
Le fichier history .dat n'est pas un csv puisque c'est un .dat! il n'a jamais été en csv.

Pour TES problémes, je pense qu'il faut procéder par étape!!!

1-Si GW N'affiche rien, c'est parce qu'il n'y a rien dans l'history.dat.
2-Pourquoi il n' y rien dans l'history.dat? Parce que HW et la station ne communiquent pas!
3-Pourquoi HW et la station ne communiquent pas? Parce que le driver du port com n'est pas le bon ou qu'il est mal configuré.

Jean et Pierre André qu'en pensez vous?
Davis VP2 6152EU en fonction => 1 panne en 6 ans.....
Cumulus+ data logger
Cumulus2sql, Sql2sql, WU update
Graphweather 3.0.27 RAS
La Crosse WS-2801 => grosse daube! 2 pluvio hs et 1 transmetteur en rideau. démontée!
La Crosse WS-2350 => HS grosse daube poubelle!!!
W7 ultimate x64
Proc 3Ghz, 6 Go de mémoire
http://www.meteo-achiet.infos.st/index.php
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

bravo je suis daccord avec vous j ai passer la station en usb et j ai essayer tous les port sans succes .
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
Avatar de l’utilisateur
iceman62
Membre
Messages : 176
Inscription : mar. avr. 12, 2011 10:14 am
Localisation : Achiet-le-grand
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par iceman62 »

ok c'est un bon début!
Quel drivers as tu mis? sachant qu'il faut empêcher windows de mettre à jour le driver!!!
Davis VP2 6152EU en fonction => 1 panne en 6 ans.....
Cumulus+ data logger
Cumulus2sql, Sql2sql, WU update
Graphweather 3.0.27 RAS
La Crosse WS-2801 => grosse daube! 2 pluvio hs et 1 transmetteur en rideau. démontée!
La Crosse WS-2350 => HS grosse daube poubelle!!!
W7 ultimate x64
Proc 3Ghz, 6 Go de mémoire
http://www.meteo-achiet.infos.st/index.php
stationmcw
Membre
Messages : 37
Inscription : jeu. nov. 19, 2015 5:51 pm
Localisation : haute corse
Contact :

Re: si quelqu'un a la solution!! graphweather

Message par stationmcw »

j ai windows 8 je vais chercher quel driver j ai .
Dernière modification par stationmcw le lun. nov. 23, 2015 9:32 pm, modifié 1 fois.
:P a trouver le problème page 4
station WS 2355 fonctionne bien sur HeavyWeatherPublisher et maintenant sur Graphweather v2 mes ne pas mettre v3 pour l instant
pc windows 8 :arrow: http://stationmcw.com
Répondre