Forum GraphWeather

Hi antoine,
I've just downloaded the last revision but I've a problem.
Afther installation ( new installation) I can't run the program.see the attache file for the error readout.
Using old revision i haven't any problem, all work fine.
I've try to copy all directory (stylshett and other) to the new directory without success.
have you any idea?

Mario

You should edit your config.cfg and find a line like that (in the begining):
Stylesheet=
Replace by:
Stylesheet=tab-full-graph.xml

Some users ask me to put relative path in config.cfg, but finally it's not a good idea.

Antoine,
I've check the cfg file but...it is ...empty.
ther is only 2 line : first is VERSION (empty), second is LICENCE: etc....etc etc.
No other line I've found (I've tryed to disinstall and reinstall to check if this was my error but, the cfg file remain the same of first installation: only 1k (like above)
I've copy line from old (2.80) to new (2.90) but, afther that opened the central window,appare this error ( impossible d'ouvir le fichier source ) and the program don't start,it continue to reload itself, open other program session ( but with the same error) but ....don't start.

Mario

You can use the version 2.0.95 in the dedicated topic.

Yes, I've downloaed the last rev but I've found that old Config file is not compatible with the new release.
If I copy the old (2.80 cfg file) to the new WG release , the program don't star and I read out The error "impossible d'ouvir le fichier source", like from my last post.
I must change/copy by hand any single option (more option!!)from old cfg into new cfg file to understand wath is the "wrong" option.
Is there any simply method to import old configuration to the new relase?

Mario

You have to copy your config.cfg from 2.0.80a or older to 2.0.95a. The version 2.0.90 will kill your config.cfg definitively.

The correct way to test a new version is :

- Make a copy B of the folder A that contains current version of GW
- Install GW directly in the folder A
- If you have custom xml, copy these files from B to A


EDIT : The english version of GW is in this thread :
viewtopic.php?f=6&t=544

Yes,
I had already tested this way (and other way)....
The problem was the same...there is some "line" in 2.0.80 cfg file that is not good for the 2.0.95 rev.
Now I'm checking (manually) avery single line ( long time!!) to find the wrong one.
For the moment the problem is not in FTP, STYLESHEET,TAB and PROBE ADJUST section (the only my modified choices) ...

Mario